Simpson Adhesive, Fast cure, AT-XP, 10oz. Caulk Tubes, SIMAT-XP10
|
|
MSRP: $47.00
$23.00
You Save: $24.00 (51 %)
Manufacturer: Simpson Strong-Tie Anchors
Manufacturer Part No: AT-XP10
PHTS Number: SIMAT-XP10
* Whole number only
|
Simpson Strong Tie AT-XP10 9.4 oz Fast-Curing Anchoring Adhesive for Concrete
The Simpson Strong-Tie AT-XP10 9.4 oz. anchoring adhesive is a fast cure, high-strength adhesive for anchoring and doweling in concrete. The nozzle is included. A truly versatile formulation, AT-XP10 adhesive cures quickly in warmer temperatures and still dispenses easily and cures reliably in colder environments.
Rigorously tested in accordance with ICC-ES AC308 and IBC 2009 requirements in both cracked and uncracked concrete, reduced temperature test results have shown AT-XP10 adhesive to perform in substrate temperatures as low as 14 F (-10 C).
FEATURES
AT-XP adhesive has passed the demanding adverse-condition tests of ICC-ES AC308 pertaining to reduced temperature, elevated temperature and long-term creep
Can be used under static and seismic loading conditions in both cracked and uncracked concrete
Dispenses easily at below-freezing temperatures without the need to warm cartridge
Cures in substrate temperatures as low as 14 F in hours, not days
Easiest hole-cleaning method - no power brushing needed
When properly mixed, adhesive will be a teal color for easy identification
Also available in 12.5 oz. and 30 oz. cartridges for a broad range of jobs
USES / APPLICATIONS
Threaded rod anchoring into concrete
Rebar doweling into concrete
Suitable for horizontal, vertical and overhead applications
FEATURES
- AT-XP adhesive has passed the demanding adverse condition tests of ICC-ES AC308 pertaining to reduced temperature, elevated temperature and long-term creep
- Code-listed per IAPMO UES ER-263
- Can be used under static and seismic loading conditions in both cracked and uncracked concrete
- Low-odor formula dispenses easily at below-freezing temperatures without the need to warm cartridge
- Cures in substrate temperatures as low as 14°F in 24 hours or less
- Easiest hole-cleaning method – no power brushing needed
- When properly mixed, adhesive will be a teal color for easy identification
|
|